ZHANGQING GAT-12V25W PoE Splitter Gigabit from PoE to 12-Volt 25-Watt with 10/100/1000M Data & Opto-Isolation Protection | IEEE 802.3af/at Passive 44~57V Input Voltage | Work with 802.3at PoE Switch

Produktbeschreibung

GAT-12V25W Convert and split PoE+ or Power over Ethernet into 12-volt DC power up to 25 watts and Gigabit data using this PoE+ splitter; Power 12 volts Single Board Computers, Tablets, and IEEE 802.3at PTZ Cameras with PoE at 12 volts. Use this gigabit PoE splitter device with your existing IEEE 802.3at PoE+ switch or 48v PoE injector to power 12-volt non-PoE devices; Try it with our 48v 60w injector to provide 25 watts of continuous 12-volt power to any device. This 12v power splitter with mounting tabs is perfect for mounted powering of non-PoE devices at a distance up to 328 feet away and capable of offering a more secure network via direct Ethernet.; Compatible with Arduino, Echo Dot 3, Arlo Pro Base Station, Fos-cam, and more. Our network-friendly inline 12 volts PoE splitter deploys opto-isolation technology to isolate and protect devices, with optional mounting tabs to enhance security of installations; Delivers 10/100/1000 Mbps Gigabit data on the RJ45 port with a 2.1mm x 5.5mm female DC connector. a) Input voltage - 802.3af/802.3at/passive 44~57v at 570 mA Max; b) Output voltage 12-volt (2% error) 25-watt 2.08-amps; c) PoE power input pins - 1&2 and 3&6 either polarity (Mode A), 4/5 plus and 7/8 minus (Mode B); d) Data output - Shielded RJ45; e) Power out DC connector - 2.1x5.5mm female connector; e) There are LED statuses on Female RJ45 - The green light on the right is "power in active", Amber light on the left is "power out active".